The circular saw requires a little introduction. Technically a circular saw is a tool designed for rapid and accurate cutting of sheet materials and timber with a flat surface. It uses a circular blade to do the actual cutting and features a number of design elements to keep the operator safe and to make the tool easy to handle and use.
If you have been using the circular saw for your weekend woodworking projects, still you need to understand the working of a circular saw. The use of the circular saw not only guaranteed results since it also protects the operator from any problem.
Here are few tips on how to use a circular saw.
Using a circular saw starts with equipping yourself with proper safety gear. An eye-protector or eye-cover is a must while working with the circular saw.
Make sure you are using the correct blade that is properly sharpened. Dull blades should be avoided as they bind and overheat.
For cutting wood, do not keep the depth of the blade more than 1/4 inch thick.
The workpiece is more likely to kick back if you have too much blade exposed.
Never force the blade into the material to be cut, instead apply gentle pressure.
Firmly holding the grip or handle, running the motor at full RPM you can begin to cut.
Support the work on both sides. Clamp it on one side if you have to.
At the end of the cut, you won’t have the material to support the weight of the saw, so be prepared for that.
Wait for the blade to stop completely before you remove it from the material
Circular Saw Safety Tips
The use of a circular saw for cutting completely different materials is sort of simple. however, at the identical time, you would like to require correct safety measures and use correct safety gear to avoid doable mishaps in your trade and different comes.
Here square measure few safety tips you would like to follow whereas operating with the circular saw.
- Always use correct safety gear just like the eye-covers or protectors, rubber or animal skin industrial gloves, etc.
- Wear dirt masks if you’re allergic to dirt.
- It is suggested to scan the user’s manual fastidiously before putting in or beginning work with the circular saw.
- Use the right blades for the various materials.
- Never saw wet wood with the buzz saw.
- Never use a tired or boring blade within the buzz saw.
- Check all the connections before beginning the work
- Support the sock properly and take away the blade from the cut when it stops fully
- If trade rummage around for doable nails within the material which can prove fatal whereas sawing.
- Never use a saw that contains a defective guard, and ne’er arrange to disable or take away the guard.
